Thanksgiving decorations for home table setups often look way too crowded to leave room for the actual food. I put this list together because most store-bought centerpieces take up way too much space and cost a small fortune.
If you are hosting family dinner and want simple, handmade crafts, these practical ideas are for you. As you scroll, look for easy DIY projects that keep your dining surface functional, warm, and ready for heavy serving platters.

1. Leaf-Wrapped Candle Holders 🍁
If your dining surface feels a little flat once the overhead lights go down, start with this glowing craft. I love how the warm light shines right through the autumn leaves, and it costs almost nothing if you already have old drinking glasses sitting in your cabinet.
You can cluster six or eight of these inside a rectangular wooden tray to keep your centerpiece neat and contained. That way, when it is time to set down the turkey platter, you can pick up the whole tray in one quick move.

Supplies You Will Need
- Six to eight clear glass tumblers or wide-mouth mason jars.
- Twenty to thirty faux fabric maple leaves in red, orange, and yellow (or real leaves pressed flat).
- Matte Mod Podge and a foam craft brush.
- Natural jute twine and sharp scissors.
- Unscented white pillar or tea light candles.
Step-by-Step Craft Instructions
- Wipe down your glass tumblers with rubbing alcohol so the glue sticks properly without leaving streaks.
- Brush a thin layer of Matte Mod Podge onto the outside of the glass, working in small sections.
- Press three or four faux autumn leaves around the lower half of the glass, overlapping the edges slightly.
- Apply another thin coat of Mod Podge right over the top of the leaves to seal the edges down flat.
- Once the glue dries completely clear, wrap jute twine twice around the center of the glass and tie a tight bow.
- Drop a white candle inside each glass and arrange them inside a low wooden tray surrounded by a few loose pinecones.


2. Mini Pumpkin and Macramé Table Runner 🎃
When you want your table decorations for home thanksgiving dinner to look layered without blocking people from seeing each other across the table, a low runner is your best friend. You can put this boho craft together in twenty minutes, and it works on both long rectangular tables and smaller setups.
I like weaving a wooden bead garland right through the leaves because it adds texture that plain fabric just lacks. Keep your painted mini pumpkins small so guests still have plenty of elbow room at their place settings.

Materials for This Runner
- One cream woven macramé or textured cotton table runner with fringe ends.
- One six-foot unfinished wooden bead garland.
- Two faux autumn maple leaf garlands in warm terracotta and rust tones.
- Five to six mini orange and white craft pumpkins.
- Matte chalk paint in burnt orange and off-white, plus a small paintbrush.
- One strand of warm white battery-operated copper wire fairy lights.
How to Assemble the Craft
- Paint two or three of your faux mini pumpkins with matte chalk paint so they look realistic and less plastic.
- Lay your cream fringed fabric runner flat down the exact center of your bare wooden dining table.
- Place the two faux maple leaf garlands end-to-end on top of the runner, bending the wire stems to give them natural movement.
- Weave the wooden bead garland in a loose figure-eight pattern through the leaves from one end to the other.
- Tuck your painted mini pumpkins into the gaps between the leaves, alternating orange and white shapes.
- Wrap the copper wire fairy lights loosely around the beads and hide the battery pack underneath a large maple leaf at the end.
3. Hand-Dyed Gauze Ribbon and Floral Setting 🕯️
Store-bought runners often look stiff right out of the package, which is why I prefer dyeing cheap cheesecloth at home for an effortless decor diy easy project. The crinkled texture catches the candlelight beautifully and makes even simple white dishes look like a planned banquet setting.
To bring height to the table, you can wire together little bundles of faux fall foliage and tuck them around brass taper holders. It gives you that high-end magazine look on a grocery store budget.

Craft Supplies Required
- Three yards of unbleached grade-90 cotton cheesecloth.
- One bottle of liquid fabric dye in terracotta or burnt orange, plus salt and warm water.
- Faux autumn leaf stems, mini faux gourds, and small dried berry picks.
- Green paddle floral wire and wire cutters.
- Four brass taper candle holders and tall cream taper candles.
DIY Dyeing and Crafting Steps
- Fill a stainless steel sink or plastic tub with warm water, stir in half a cup of salt, and add the terracotta liquid dye.
- Wet the cheesecloth in clean water first, then submerge it in the dye bath for fifteen minutes, stirring gently with a wooden spoon.
- Rinse the fabric in cold water until the water runs clear, then twist it tightly into a rope and let it air dry so the natural crinkles stay locked in.
- Scrunch the dried burnt-orange gauze runner loosely down the middle of your dining table, letting the ends pool over the edges.
- Cut your faux leaf stems into six-inch pieces and wrap three or four stems together with floral wire to make mini foliage clusters.
- Place your wired leaf clusters down the crinkled runner, tuck in mini gourds, and nestle the tall brass taper candles right in the center.


4. Outdoor Pumpkin and Fairy Light Table 🍂
Hosting outside on the patio is great when the weather holds up, but evening breezes can blow out open flames fast. For an outdoor dinner party, I always craft a weighted garland runner wired with micro lights so the table stays bright even after sunset.
Wiring the pumpkins and pinecones directly onto a hidden twine base keeps the whole arrangement from shifting when people pass the gravy boat. It also contrasts nicely against a crisp white tablecloth.

What You Need for This Setup
- One floor-length white linen tablecloth and a rust-colored gauze overlay runner.
- Heavy-duty floral wire and a roll of thick jute twine.
- Ten to twelve assorted mini pumpkins and gourds in white, pale yellow, and orange.
- One dozen medium pinecones and three faux autumn leaf garlands.
- Two strands of warm white waterproof micro-LED string lights.
- Six tall bronze taper candles in weighted metal holders.
Step-by-Step Assembly
- Cut a piece of thick jute twine the exact length of your dining table to act as the hidden spine of your centerpiece.
- Use floral wire to attach the three faux autumn leaf garlands onto the jute twine so they form one thick, continuous base.
- Lay your white tablecloth down first, scrunch the rust gauze runner down the center, and place your wired leaf garland on top.
- Twist short pieces of floral wire around the bottom scales of your pinecones and attach them directly to the leaf garland spine.
- Nestle the orange and white mini pumpkins along the foliage, spacing your weighted bronze taper holders evenly down the middle.
- Weave the waterproof micro-LED lights through the leaves and pumpkins right before guests arrive for dinner.
5. Mason Jar Turkey Favors 🦃
Keeping younger guests happy while the adults finish talking is half the battle at family gatherings. Crafting these cute mason jar turkeys gives you an instant centerpiece for the kids table, and everyone gets to take home a jar of treats afterward.
Instead of dealing with messy liquid glue that takes hours to dry, use hot glue and stiff craft felt for the feathers. You can even write each child’s name on a little cardstock tag tied around the rim so they double as place cards.

Craft Basket Supplies
- Half-pint clear glass mason jars with two-piece metal lids (one per guest).
- Stiff craft felt sheets in red, yellow, orange, and dark brown.
- Large adhesive googly eyes and sharp fabric scissors.
- Hot glue gun with clear glue sticks.
- Chocolate candies, candy corn, or peanut butter cups to fill the jars.
- Thin burlap ribbon for wrapping the metal lids.
How to Make the Turkey Jars
- Trace five feather shapes onto the red, orange, and yellow felt sheets, making each feather about four inches tall.
- Cut out the felt feathers, along with a small yellow triangle for the beak and a red teardrop shape for the wattle.
- Fan five alternating colored feathers out behind the back of a clean mason jar and glue their bases right to the glass using hot glue.
- Cut a three-inch circle out of brown felt, glue on two googly eyes, the yellow beak, and the red wattle, and stick the face onto the front of the jar.
- Fill each jar to the top with chocolate candies or autumn trail mix and screw the metal lid on tightly.
- Glue a strip of thin burlap ribbon around the metal lid edge to hide the silver band and finish the craft.


6. Metallic Pinecone Place Card Holders 🌲
When fifteen people walk into the dining room at once, nobody knows where to sit unless you guide them. These inexpensive pinecone holders solve the seating shuffle fast, and the brushed silver tips give your table a clean, modern edge.
I usually pick up pinecones from the yard a week early and bake them on a foil-lined tray at 95°C for thirty minutes to get rid of any sap or bugs. Once they cool down, painting the edges takes less than ten minutes.

Materials Needed
- One dozen medium-to-large flat-bottomed pinecones.
- Metallic silver and champagne gold acrylic craft paint.
- A small flat-bristle paintbrush and scrap cardboard.
- Heavyweight cream cardstock and a fine-tip black calligraphy pen.
- Craft paper trimmer or sharp scissors.
Crafting Your Place Holders
- Check that each pinecone sits flat on the table; if any wobble, snip a few bottom scales off with wire cutters to level the base.
- Squeeze a quarter-sized amount of metallic silver paint onto scrap cardboard and lightly dab the tips of your paintbrush into it.
- Brush the silver paint across the outer edges of the pinecone scales using a dry-brush motion so the natural brown wood still peeks through inside.
- Let the pinecones dry for twenty minutes while you cut your cream cardstock into two-by-three-inch rectangles.
- Write each guest’s first name neatly in the center of a card using your black pen and let the ink dry completely.
- Slide the bottom edge of each name card firmly between the top two rows of pinecone scales right above each dinner plate.
7. Cinnamon Stick Candle Bundles 🕯️
Nothing kills the vibe at a dinner table faster than artificial floral scents clashing with roasted garlic and turkey. Wrapping real cinnamon sticks around unscented vanilla candles gives you a subtle, warm spice smell that actually belongs in a dining room.
You can set a trio of these on a round dining table or even on your living room coffee table where people gather for appetizers. Just make sure the cinnamon sticks are roughly the same height as the candle so the wax melts down inside the bundle without catching the wood.

Craft Supplies List
- Three unscented cream pillar candles in varying heights (four, five, and six inches tall).
- Three bulk bags of six-inch whole cinnamon sticks.
- Thick rubber bands and a low-temp hot glue gun.
- One roll of wide burlap ribbon and thin natural twine.
- One round ceramic or slate candle plate.
How to Bundle the Candles
- Stretch a thick rubber band around the middle of your first pillar candle to hold the sticks in place before gluing.
- Slide whole cinnamon sticks vertically under the rubber band all the way around the candle until the wax sides are completely covered.
- Lift one cinnamon stick at a time, place a small line of low-temp hot glue on the back, and press it firmly against the candle side.
- Once all sticks are glued secure, carefully snip and remove the rubber band so it does not show.
- Wrap a strip of wide burlap ribbon around the center of the cinnamon bundle, Layer thin twine over it, and tie a neat double knot in the front.
- Group all three finished candles together on a round ceramic plate in the center of your table.
8. Burlap and Plaid Cutlery Pouches 🍴
Setting out three forks, two spoons, and a knife for every single guest can make a table feel cluttered before the meal even starts. Sewing or gluing simple burlap pouches keeps each setting simple and bundles all the silverware into one neat pocket on top of the plate.
If you do not own a sewing machine, fabric fusion tape or hot glue works just as well on burlap because the thick weave holds glue tightly. Adding a strip of autumn plaid ribbon across the front cuff ties the whole look together.

Supplies You Will Need
- One yard of tight-weave craft burlap fabric.
- One roll of one-inch autumn tartan plaid wired ribbon in orange, brown, and cream.
- Fabric scissors and a ruler.
- High-temp hot glue gun or iron-on hem tape.
- Rust-colored cloth or heavy paper dinner napkins and silverware.
Step-by-Step Pouch Instructions
- Measure and cut your burlap fabric into rectangles that are five inches wide by eleven inches long (one rectangle per place setting).
- Pull two horizontal threads off the top short edge of each rectangle to create a neat half-inch fringed border.
- Lay a rectangle flat, fold the bottom edge up four and a half inches toward the fringed top to form a pocket, leaving the top flap longer in back.
- Run a thin line of hot glue down the left and right inside edges of the folded pocket and press firmly for ten seconds to seal the sides.
- Cut a six-inch piece of autumn plaid ribbon, glue it horizontally across the front of the pocket, and fold the raw ends around to the back.
- Fold a rust-colored napkin lengthwise, slide it into the burlap pouch, and tuck your fork, knife, and spoon right in front of the napkin.
9. Rustic Wood Slice Charger Plates 🪵
Buying twelve matching charger plates for a single holiday meal gets pricey fast, and storing them the rest of the year is a headache. If you have access to fallen birch or oak branches—or grab unfinished slabs from the craft store—making your own wood slice chargers adds instant warmth to your dining table.
Sanding the tops smooth and brushing on a food-safe clear sealant keeps bark dust off your tablecloth while bringing out the natural grain rings. Afterward, you can stack a couple on your entry console table under a vase or candle.

Tools and Materials Required
- Eight to ten unfinished natural wood slices ( eleven to twelve inches in diameter and one inch thick).
- Medium-grit (120) and fine-grit (220) sandpaper or an orbital hand sander.
- A stiff bristle brush for cleaning the outer bark edge.
- Water-based matte polyurethane sealer or food-safe butcher block oil.
- A two-inch foam brush and clean lint-free rags.
How to Finish the Wood Chargers
- Brush the outer bark rim of each wood slice with a stiff dry brush to knock off any loose dirt or flaky bark pieces.
- Sand both flat faces of the wood slice starting with 120-grit sandpaper to smooth out saw marks, then switch to 220-grit for a silky finish.
- Wipe away all sawdust thoroughly using a slightly damp lint-free rag and let the wood dry for fifteen minutes.
- Brush a thin, even coat of water-based matte polyurethane across the top and sides of the wood slice to lock the bark in place.
- Let the first coat dry for two hours, lightly scuff with 220-grit sandpaper, and apply a second thin coat for protection against food spills.
- Once cured for twenty-four hours, place one finished wood slice at each seat on your dining table and set your dinner plate on top.
10. Paper Accordion Pumpkin Garland 🎃
When you want ideas diy crafters can pull off with basic supplies already sitting in a desk drawer, cardstock accordion pumpkins are a lifesaver. They add playful 3D shape down the middle of a table or along the front edge of a buffet without costing more than a pack of paper.
I like mixing solid burnt orange cardstock with cream book pages or kraft paper so the garland looks styled rather than like a classroom project. Instead of hanging it on the wall, snake it right down your table runner between candle holders.

Craft Paper Supplies
- Twelve sheets of twelve-by-twelve-inch heavyweight cardstock in burnt orange, mustard yellow, and kraft brown.
- A paper scoring board (or ruler and butter knife) and sharp scissors.
- Double-sided craft tape and a hot glue gun.
- Brown pipe cleaners and green cardstock for stems and leaves.
- Six feet of thin natural jute twine.
Folding and Stringing Instructions
- Cut each twelve-by-twelve sheet of cardstock into three strips measuring four inches wide by twelve inches long.
- Score and fold each paper strip back and forth every half-inch like a paper fan until all strips are accordion-folded.
- Tape three accordion-folded strips of the same color end-to-end to form one long folded strip, then glue the two final ends together to make a ring.
- Press the center of the paper ring flat onto the table so it fans out into a round 3D medallion, and secure the center hole on both sides with hot glue.
- Cut a two-inch piece of brown pipe cleaner, curl one end around a pencil like a vine tendril, and glue it into the top crease as a pumpkin stem.
- String a six-foot piece of jute twine through the top back folds of eight finished paper pumpkins and lay the garland down the center of your table.
11. Metallic Acorn and Felt Ball Cornucopia Fillers 🌰
Traditional wicker cornucopias can look a little dated when they are stuffed with shiny plastic fruit from the dollar store. Updating your basket filler with real acorn caps glued onto wool felt balls gives you a minimal modern twist that still nods to the classic harvest tradition.
Painting the real acorn caps with a touch of metallic silver or copper makes them catch the light next to your glassware. Once Thanksgiving is over, you can scoop the felt acorns into a glass bowl for winter decor.

Materials You Will Need
- Fifty natural dried acorn caps (collected outdoors or bought from a craft supply shop).
- Fifty two-centimeter wool felt balls in cream, heather gray, mustard, and rust orange.
- Metallic silver and copper acrylic paint with a fine detail brush.
- A low-temp hot glue gun and glue sticks.
- One woven wicker cornucopia basket or low wooden dough bowl.
How to Craft the Felt Acorns
- Spread your dried acorn caps out on a piece of wax paper and wipe away any loose dust with a dry paper towel.
- Paint the outside of half the acorn caps with metallic silver paint and leave the other half natural brown for contrast.
- Once the paint dries completely, squeeze a pea-sized drop of hot glue inside the hollow center of an acorn cap.
- Press a wool felt ball firmly into the glued acorn cap and hold it for five seconds until the bond sets.
- Repeat with all fifty felt balls, mixing cream and gray balls with the silver caps, and mustard and rust balls with the natural brown caps.
- Place your wicker cornucopia in the center of your dining table and pour the crafted felt acorns inside so they spill gracefully onto the runner.
12. Corn Husk Wrapped Votive Rings 🌽
If you already buy tamale wrappers from the grocery store aisle, you have the main supply for one of the best rustic setting diy crafts around. Dried corn husks turn soft and flexible after soaking in warm water for ten minutes, making them super easy to wrap around plain glass votives.
As the husks dry around the glass, they shrink slightly and form a tight, textured jacket that diffuses candlelight with a warm amber glow. Tying a thin strip of suede leather cord around the middle finishes them off cleanly.

Supplies for This Craft
- One package of dried corn husks (found in the international aisle of most grocery stores).
- Six to eight plain clear glass votive holders or short jam jars.
- A bowl of warm water and paper towels.
- Scissors, thick rubber bands, and dark brown suede leather cord.
- Unscented tea light candles.
Wrapping Instructions
- Submerge a handful of dried corn husks in a bowl of warm water for ten minutes until they feel soft and bend without cracking.
- Lay the damp husks flat on paper towels, pat off excess water, and cut the wide bottom ends straight across with scissors.
- Wrap three overlapping damp corn husks vertically around a glass votive holder so the straight cut edge lines up evenly with the bottom of the glass.
- Trim the pointy top tips of the husks with scissors so they sit a quarter-inch below the top rim of the glass for fire safety.
- Slip a rubber band around the middle of the wrapped glass and let the corn husks dry overnight so they mold tightly to the cylinder shape.
- Remove the rubber band the next day, wrap brown suede leather cord twice around the center, tie a knot, and place a tea light inside.
13. Kids’ Kraft Paper Activity Runner 🖍️
Spilled cranberry sauce on an heirloom tablecloth is a stress nobody needs during a big family party. Rolling brown kraft paper down the table and drawing interactive activity frames at each seat keeps kids busy coloring while dinner is being served.
You can draw simple tic-tac-toe grids, a “Draw What You Are Thankful For” frame right above each plate, and trace their silverware outlines so they can help set the table themselves. Stick a few small mason jars filled with crayons down the middle and cleanup takes ten seconds flat.

What You Need
- One roll of twenty-four-inch or thirty-inch wide brown butcher kraft paper.
- Painter’s tape (to tape the paper ends safely under the table edge).
- One black chisel-tip permanent marker and one white chalk marker.
- Three small glass jars or tin cans wrapped in autumn ribbon.
- Assorted crayons and washable colored pencils.
How to Set Up the Runner
- Unroll the brown kraft paper down the full length of the dining table, leaving six inches of overhang on both ends.
- Fold the overhanging paper ends neatly underneath the table edge and secure them with strips of painter’s tape so the runner stays flat.
- Set a dinner plate briefly at each seat to gauge spacing, then draw a decorative rectangular picture frame on the paper right above each plate spot.
- Write prompts inside the frames with your black marker, such as “I Am Thankful For…”, tic-tac-toe boards, and autumn leaf outlines to color in.
- Trace the outline of a plate, fork, knife, and cup at each spot using the white chalk marker so kids know where their dishes belong.
- Place your dinnerware over the traced outlines and set the crayon jars down the center of the table within easy reach of every seat.
14. Matte Painted Wine Bottle Vases 🌾
If you prefer minimalistdecor ideas that do not clutter up the table with tiny knick-knacks, upcycling empty glass wine bottles is a smart route. Two coats of matte chalk spray paint turn mismatched recycling into a sleek ceramic-looking vase set in under an hour.
Using matte white and warm copper paint gives you a clean, high-end look that fits a long banquet table or a narrow dining setup equally well. Tuck three or four dried golden wheat stalks into each bottle neck to keep the arrangement airy and tall.

Craft Materials List
- Five empty glass wine or olive oil bottles in varying heights and shapes.
- Warm soapy water and a razor scraper (for removing paper labels).
- One can of matte chalk-finish white spray paint and one can of matte copper spray paint.
- Painter’s tape and old newspaper for a drop cloth.
- One bunch of dried natural golden wheat stalks or bunny tails.
Painting and Styling Steps
- Soak the empty glass bottles in warm soapy water for thirty minutes, scrape off all paper labels and glue residue, and let them dry completely.
- Take the bottles outside to a well-ventilated area and stand them upright on newspaper a foot apart from one another.
- Spray three of the bottles with two light, even coats of matte chalk white paint, waiting twenty minutes between coats to prevent drips.
- Spray the remaining two bottles with matte copper paint, or tape off the top half of a white bottle to spray a copper color-block base.
- Let the painted bottles cure for two hours until the finish feels chalky and completely dry to the touch.
- Trim your dried wheat stalks to varying heights, slip five stalks into each bottle neck, and line them up down the center of your dining table.
15. Fresh Rosemary Wreath Napkin Rings 🌿
When you want simplesettings that smell amazing the second guests sit down, skip the plastic napkin rings and use fresh culinary herbs instead. Twisting six-inch sprigs of fresh rosemary into tiny mini wreaths takes less than two minutes per plate and looks effortlessly pulled together.
Rosemary stems are naturally woody and hold a circle shape well once you bind the ends with thin floral wire. You can craft these the morning of Thanksgiving, mist them lightly with water, and keep them in the fridge in a sealed bag until an hour before dinner.
Supplies You Will Need
- Two large clamshell packs of fresh rosemary sprigs (look for long, flexible stems at the grocery store).
- Green 26-gauge floral paddle wire and wire cutters.
- Thin cream satin ribbon or natural baker’s twine.
- Ironed linen dinner napkins in oatmeal, sage green, or white.
- Small misting spray bottle filled with cold water.
How to Twist the Rosemary Rings
- Sort through your fresh rosemary and pick out twelve long, flexible stems that are at least six to seven inches long.
- Gently bend one rosemary stem into a small two-inch circle, overlapping the woody bottom end with the leafy top tip.
- Cut a three-inch piece of thin green floral wire and wrap it tightly around the overlapped stem ends, tucking the sharp wire tip under the leaves.
- If a stem looks a little sparse on one side, wire a second shorter rosemary sprig over the thin spot to make the mini wreath look full.
- Tie a tiny bow of cream satin ribbon right over the floral wire joint to hide the wire completely.
- Roll or fold your linen napkin neatly, slide the fresh rosemary wreath around the center, and place one on top of each dinner plate.
FAQs
How far in advance can I make these DIY Thanksgiving table crafts?
Most non-perishable crafts—like the leaf-wrapped candle holders, burlap cutlery pouches, painted wine bottles, and felt acorn fillers—can be made two to three weeks ahead of time and stored in a dry closet. If you are using fresh elements like the rosemary napkin rings, assemble those the morning of Thanksgiving and store them in the refrigerator wrapped in a damp paper towel so they stay crisp.
How do I decorate a narrow dining table without blocking space for food platters?
Stick to vertical or plate-level crafts when table width is tight. Use painted wine bottle vases with narrow wheat stalks or tall taper candles in the center, and move your decorative touches onto the individual plates using pinecone place card holders, rosemary napkin rings, or burlap cutlery pouches.
Which DIY Thanksgiving table projects are quickest and easiest to budget?
Here is a quick breakdown to help you pick the right project based on your time and budget:
| Craft Idea | Prep Time | Estimated Cost | Best Table Type |
| Pinecone Place Card Holders | 15 mins | Under $5 | Any size dining or banquet table |
| Rosemary Wreath Napkin Rings | 20 mins | $6 – $8 | Narrow or minimalist tables |
| Leaf-Wrapped Candle Holders | 30 mins | Under $10 | Round, rectangular, or coffee tables |
| Kids’ Kraft Paper Runner | 15 mins | $8 – $12 | Kids’ tables or casual family tables |
| Mini Pumpkin & Macramé Runner | 25 mins | $15 – $20 | Long rectangular dining tables |
Are candles safe to use near dried leaves, corn husks, and faux garlands?
Whenever you craft with dry botanicals like corn husks, pinecones, or faux leaves, keep open flames inside glass cylinders whose rims sit at least an inch higher than the craft material. If you are weaving lights directly into a cheesecloth or leaf runner, always use cool-touch battery-operated LED fairy lights or flameless flickering tapers for peace of mind.
Putting together a memorable holiday table does not mean you have to spend all week crafting or blow your grocery budget on fancy centerpieces. Pick just one central runner idea and pair it with a simple plate accent like the rosemary rings or pinecone holders so your dining room feels warm, personal, and still has plenty of room for the gravy boat.

If you found a project here you want to make for your family dinner this year, save this post to your Thanksgiving Decor board on Pinterest right now so you have the supply lists and steps handy when you are ready to craft! 📌🍂
